Ericsson RX8000 Series - Manual (Page 71)

Chapter 3
3. Use the S (Up) and T (Down) keys to toggle between the available types: ASI
and IP Input (dependent on model and option licences obtained).
4. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2 2.2 IP Input Card
This menu allows the viewing and editing of the IP Input Card parameters. To
access this menu, press the T (Down) key. The following screen is displayed:
IP I/P |IP Input Card
2.2 | >
3.5.3.2.1 2.2.1 Status
To access the Status menu for the I/P Card, press the X (Forward) key. The
following screen is displayed:
STATUS |LAST IP RECEIVED
2.2.1 |000.000.000.000 >
3.5.3.2.1.1 2.2.1.1 Current Port
To view the port, which is currently selected, press the X (Forward) key. The
following screen is displayed:
STATUS |CURRENT PORT (STATUS)
2.2.1.1 |Port
1
3.5.3.2.1.2 2.2.1.2 Encapsulation
To view the encapsulation status, press the T (Down) key. The following screen is
displayed:
STATUS |ENCAPSULATION
2.2.1.2 |UDP
ONLY
3.5.3.2.1.3 2.2.1.3 Number of Columns/Rows
To view the number of columns and rows, press the T (Down) key. The following
screen is displayed:
STATUS |NUMBER OF COLUMNS N/A
2.2.1.3 |NUMBER OF ROWS N/A
3.5.3.2.1.4 2.2.1.4 IP Packets Received
To view the number of IP Packets received, press the T (Down) key. The following
screen is displayed:
EN/LZT 790 0005 R1A 3-23