Ericsson RX8000 Series - Manual (Page 96)

Chapter 3
STATUS |SERVICE ID: 00002
3.1.1 |SERVICE NO PMT
The second line of the display shows information about the decryption status of the
service.
To return to the previous menu, press the W (Back) key.
3.5.6.2 3.2 Video
To access the Video menu, press the T (Down) key. The following screen is
displayed:
SERVICE |VIDEO
3.2 | >
3.5.6.2.1 3.2.1 Component Selection
To view and edit this service, press the X (Forward) key. The following screen is
displayed and the Edit key is lit:
VIDEO |COMPONENT SELECTION
3.2.1 | 202 – MPEG-4 AVC (NOT PRESENT)
To edit the video component:
1. Press the Edit key. The cursor appears at the start of the current component.
2. Using the S (Up) and T (Down) keys toggle between the available options: 202
- MPEG-4 AVC, 0 – MPEG-2 USER and NO SELECTION.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.6.2.2 3.2.2 Video User PID
To view and edit the User PID, press the T (Down) key. The following screen is
displayed and the Edit key is lit:
VIDEO |USER PID: 00202
3.2.2 |USER STD: MPEG-2
To edit the user PID:
4. Press the Edit key. The cursor appears below the first character of the current
PID selection.
5. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
EN/LZT 790 0005 R1A 3-48