HP 8360 - Manual (Page 164)

ANALYZER STATUS REGISTER
AM Type
Function Group
Menu Map
Description
Programming Codes
See Also
MOD (MODULATION)
4
This (Option 002 only) scales the amplitude modulation
function linearly. The amplitude of the RF output changes linearly
as a function of AM input changes (or at a rate set by
for
internal AM). S ee “Specifications” for the AM characteristics, input
range, and damage level. An asterisk next to the key label indicates
that this feature is active.
AM:TYPE
.
Analyzer: function on, function off
CONNECTORS,
“Optimizing Synthesizer Performance” in Chapter 1.
ANALYZER STATUS
REGISTER
Function Group NONE
Menu Map NONE
Description The following is the status register structure of the synthesizer when
the analyzer programming language is selected. This status structure
is the structurally and syntactically the same as on the HP
Output Status bytes, is used to read the two status
bytes from the synthesizer. The first status byte concerns
the cause of an SRQ (S
Request), while the second
status byte concerns failures and faults, as follows:
HP 8360
User’s Handbook Operating and Programming Reference