HP 8360 - Manual (Page 293)

Pulse
Programming Codes
PULSe:SOURce
PULSe[:STATe]
Analyzer: NONE
Pulse
Menu
Pulse
Scalar
Function Group
Menu Map
Description
Programming Codes
See Also
(MOD)
4
This activates pulse modulation mode, and sets the internal
pulse generator to produce 27.778 square wave pulses
(18 pulse width, 36 pulse period). The rise and fall times of
the RF envelope are approximately 2 These pulses allow proper
operation with HP scalar network analyzers in ac detection mode.
An asterisk next to the key label indicates that this feature is active.
PULSe:SOURce
PULSe[:STATe]
Analyzer: SHPM function on, function off.
Pulse Menu
“INSTALLATION,” Chapter 3.
HP 8360
User’s Handbook
Operating and Programming Reference