HP 8360 - Manual (Page 236)

Internal Pulse Mode Gate
Programming Codes SCPI: PULM:INTernal:WIDTh <num>[time
Analyzer: NONE
See Also a so see “Pulse” and “Modulation”,
Internal Pulse Mode Auto
Function Group
Menu Map
Description This (Option 002 only) is the default mode of generating
internal pulses. It is not synchronized to any trigger signal. An
asterisk next to the key label indicated that this mode is selected.
Programming Codes SCPI: PULM:INTernal:TRIGger:SOURce
Analyzer: NONE
See Also a so see “Pulse” and “Modulation”.
Internal Pulse Mode Gate
Function Group
Menu Map
Description This (Option 002 only) logically the internal pulse
generator with a gating signal supplied from an external source.
Programming Codes
PULM:INTernal:GATE
PULM:INTernal:TRIGger:SOURce
Analyzer: NONE
See Also (MOD), also see “Pulse” and “Modulation”.
HP 8360
User’s Handbook
Operating and Programming Reference 1