HP 8360 - Manual (Page 288)

Pt Trig
Function Group FREQUENCY
Menu Map
Description This accesses the list mode point trigger softkeys.
List Pt Trig Auto Automatically steps the synthesizer
to next point in the frequency list.
List Mode Pt Trig Bus Steps the synthesizer to the next
point in the frequency list when an
HP-IB trigger is received.
List Mode Pt Trig Ext Steps the synthesizer to the next
point in the frequency list when
an external hardware trigger is
received.
Programming Codes SCPI: NONE
Analyzer: NONE
See Also listed above, List Menu
Pulse Normal
Function Group
Menu Map
Description This (Option 002 only) lets you set a value for the internal
pulse generator’s pulse delay. The output pulse is delayed from
the leading edge of the PULSE SYNC OUT signal. The range of
acceptable values is from 0 to a maximum of 25 ns less than the
period. The factory preset default is 0 ns. Use the numeric entry
keys, arrow keys, or rotary knob to change the value. When this
feature is active, its current value is displayed in the active entry
area.
Operating and Programming Reference HP 8360
User’s Handbook