Holder C-Trac 4.74 - Manual (Page 157)

C 4.74
Operating instructions
156 149 443
General remarks on maintenance
3
4
Bild_C240
2
1
Bild_C239
Tilting the cab
The cabin can be tilted for repairs and servicing.
ATTENTION
Raise the cabin carefully.
- Remove the front fender by removing the socket head
screw and pushing the roller back.
- Remove the nuts (1) and retaining plate at the rear of
the cabin.
- Attach the M14 eyebolt* (2) to the top of the cab
frame.
- Attach a hook or rope and slowly lift the cabin up with
a hoist.
- Take the stay rod (3) out of the support, insert it on
the vehicle frame and secure it with the retaining pin
(4).
DANGER
Working under the cabin is only allowed with
the stay rod in place.
* Option (commercially available)