Holder C-Trac 4.74 - Manual (Page 85)

C 4.74
Operating instructions
84 149 443
Operating the implements
Bild_C266
1 2
Connecting hydraulic lines
ATTENTION
The hydraulic couplings on the vehicle must
not carry any pressure before the connection
is made. The couplings on the vehicle and
the hydraulic hoses must be clean.
NOTE
Each implement has different functions and
hydraulic lines to the control unit. Observe
the operating instructions supplied with your
implement and make yourself familiar with
the functions and colour codes.
- Open the protective caps of the hydraulic couplings (1).
- Attach the colour coded hydraulic hoses (2) of the
implement to the hydraulic couplings of the same
colour on the vehicle.
ATTENTION
The hydraulic male couplings fit on each cou-
pling and can therefore be connected incorrectly.
With the connection you decide which func-
tion/movement of the implement is actually
to be performed with the control lever as-
signed to the coupling. DANGER
If you are not sure about the functions, de-
termine them by making trials at a safe place.