Holder C-Trac 4.74 - Manual (Page 61)

C 4.74
Operating instructions
60 149 443
Operation
1
Bild_C165
Driving
Driving with hydrostatic drive and digital electronics
- Start the engine.
- Preselect the direction of travel with the direction
switch (1).
- Pull up the forward/reverse selector switch (1) and
move it to the front or rear (forward or reverse).
NOTE
After starting the engine, the forward/reverse
selector switch must be operated once if it
was in the forward or reverse position when
starting. This prevents any accidental move-
ment of the vehicle when starting the engine.
NOTE
You can also select the new direction when
travelling at reduced speed.
CAUTION
The vehicle will brake strongly and acceler-
ate in the opposite direction.