Henny Penny 342 - Manual (Page 30)

Model OFE/OFG/OEA/OGA-341, 342
2-24. AUTOLIFT
ACTUATOR
(MOTOR)
REPLACEMENT
(if
applicable)
8. Remove the 2 top screws securing the support plate and
remove the plate from the unit. Figure 2-84.
Figure 2-84
9. Using a 15T torx driver, remove the 2 torx screws from
the back shroud, and pull the actuator from the unit.
Figure 2-85.
Figure 2-85 10. Install new actuator in reverse order.
2-30 1003