HP 3000dtn - Manual (Page 108)

8-8
ENWW
The printer Ready light turns off while the printer is
turned on
The printer is offline and the LCD control panel displays the
message
PAUSED
Press (pause/resume button) on the printer. The printer resumes
printing the current job or returns to the READY state.
The printer shuts down unexpectedly
Check the power
Make sure the power cord is connected firmly to the printer and to
a working power receptacle, and that the printer is turned on.
The Ready light on the LCD control panel should be green. Press and
hold
(power button) to turn off the printer, and then turn it on again.
Nothing is printed
z Be patient
Complex documents that contain many fonts, graphics, and color
photos take longer to begin printing. The LCD control panel
displays the message
PROCESSING JOB and the Ready light blinks
when the printer is processing information to be printed.
z Check the power
Make sure the power cord is connected firmly to the printer and to a
working outlet, and that the printer is turned on. The LCD control
panel should display some message and the Ready light should be
green. Press and hold
(power button) to turn off the printer,
and then turn it on again.
z Check the interface cable
Make sure the interface cable (USB, parallel, or network) is
connected properly.
z Check the print media
Make sure media is loaded correctly in the tray and that the print
media is not jammed in the printer. For more information about
loading media, see “
Selecting and loading print media .”