HP 3000dtn User Manual
Page 130
8-30
ENWW
To clear jams in Tray 1
1
Remove all media from Tray 1.
2
Pull out Tray 1 and place it on a flat surface. Remove any wrinkled
or curled media from the tray.
3
Grasp any jammed or torn media by both corners and pull up and
out of the printer. Reinsert Tray 1.
4
Load media in Tray 1. Check that the media is loaded properly. For
more information on loading media in Tray 1, see “
.”
5
Press
(help button) to clear the message in the LCD control
panel, and then press
(select button) to continue printing.
Jam recovery
The printer automatically provides jam recovery, a feature that allows
you to set whether the printer should attempt to automatically reprint
jammed pages. The options are as follows:
z
AUTO. Printer will attempt to reprint jammed pages when sufficient
memory is available. This is the default setting for the printer.
z
OFF. Printer will not attempt to reprint jammed pages.
z
ON. Printer will reprint any jammed page. Additional printer memory
is required for this setting, so if additional memory is not installed,
overall printer performance may suffer.