HP 3000dtn - Manual (Page 26)

2-12
ENWW
8 Follow the instructions on the screen to complete the installation.
9 Connect the USB cable to the computer and the printer. The Found
New Hardware wizard appears on the computer screen, and the
printer icon is created in the Printers folder.
Note If your computer is running Windows 98 or Windows Millennium
Edition, the installation program prompts you to restart the
computer. Plug in the USB cable only after Windows has restarted.
You can also choose to restart the computer at a later time.
Hardware-first installation
Note Before you can install the printer software on a computer running
Windows XP 64-bit, you must download the printer software from
http://www.hp.com .
If you have connected the USB cable to the ports on the computer and
the printer before installing the printer software, the Found New
Hardware wizard appears on the computer screen.
1 In the Found New Hardware wizard, click Next.
2 Click Search for the best driver for your device
(Recommended), and then click Next.
3 Insert the Starter CD into the CD-ROM drive.
If the CD menu appears, click Exit twice to close the CD menu.
4 Select Specify a location, click Browse to locate the installation
files for the operating system the computer is using, and then
click OK.
• For Windows 98 and Windows Millennium Edition, use
DRIVERS\<PRINTER DRIVER>\WIN9X_ME\<LANGUAGE>.
For example, DRIVERS\PCL6\WIN9X_ME\ENGLISH contains
the installation files for the English version of the PCL 6
printer driver.
• For Windows 2000 and Windows XP, use
DRIVERS\<PRINTER DRIVER>\WIN2K_XP\<LANGUAGE>.
For example, DRIVERS\PS\WIN2K_XP\ENGLISH contains the
installation files for the English version of the PS 3 printer driver.
5 Click Next, and then follow the instructions on the screen.
6 Click Next, and then click Finish.
7 If you are using Windows 98 or Windows Millennium Edition,
complete steps 3 through 6 again to finish the installation.