HP 3000dtn User Manual
Page 80
6-14
ENWW
To print using the PCL 6 printer driver
1
On the File menu, click Print.
2
On the Name drop-down menu, select the PCL 6 printer driver, and
then click Properties or Setup. (The options might be different for
your application.)
3
On the Size is drop-down menu, select the media size on which
you want to print.
4
On the Type is drop-down menu, select the type of media on which
you want to print.
5
On the Source is drop-down menu, select the location of the media
want to print.
• If the media type you want to print has been configured in the
LCD control panel, select Auto Select. The printer automatically
selects the appropriate tray for the media. For information about
configuring the media type settings in the LCD control panel, see
“
To set media size and type in the LCD control panel
.”
• If you want to print an envelope, card, or other special media
using Tray 1, select Manual Feed, and then follow the
instructions in the LCD control panel. For information about
loading Tray 1, see “
.”
• If you want to print from a specific tray, select Tray 1, Tray 2, or
Tray 3.
6
On the Paper tab, click a print mode in the Print Quality section.
7
Change other print settings, if necessary, and then click OK.
8
Click Print.