HP 3000dtn - Manual (Page 63)

ENWW
5-1
5 Configuring network
connectivity
You can configure network parameters from the LCD control panel,
the embedded Web server, or for most networks, from the
HP Web Jetadmin software. For more information about using the
embedded Web server, see “
Using the embedded Web server .”
For a complete list of supported networks and for instructions on
configuring network parameters, see the HP Jetdirect Print Server
Administrator’s Guide. This guide is provided on the Starter CD for
printers shipped with an HP Jetdirect print server.
Configuring Novell NetWare frame type
parameters
The HP Jetdirect print server automatically selects a NetWare frame
type. Select a frame type manually only when the print server selects an
incorrect frame type. To identify the frame type chosen by the
HP Jetdirect print server, print a configuration page from the
LCD control panel. See “
Printing a Configuration page .”
The following frame types are supported:
z Ethernet_802.3
z Ethernet_II
z Ethernet_802.2
z Ethernet_SNAP