HP 3000dtn User Manual
Page 29
ENWW
2-15
Connecting the printer using a network connection in
Windows
Note
When setting up the printer using a network connection, connect
the printer to the network first, and then install the software.
1
If an HP Jetdirect print server was purchased separately, install it in
the printer. The print server must be installed before you install the
printer software. For information about installing the HP Jetdirect
print server, see “
Installing optional accessories
.”
Note
The HP Jetdirect print server is pre-installed in the HP Business
Inkjet 3000n and 3000dtn printer configurations.
2
Connect the network cable between the HP Jetdirect print server
and a network port.
3
Start Windows and make sure no other Windows applications
are running.
4
Insert the Starter CD into the CD-ROM drive. The CD menu runs
automatically.
If the CD menu does not run automatically, click Start, and then
click Run. At the command line box, type the letter of your
computer's CD-ROM drive followed by :\SETUP (for example,
type D:\SETUP).
5
On the CD menu, click Install Printer Driver.
6
Choose your language, and then click OK.
7
Follow the instructions on the screen.
8
Click Connected to the network, and then click Next.
9
Click Basic Server or Peer-to-Peer Network Setup, and then
click Next.
10 Follow the instructions on the screen to complete the installation.
For more information about network configuration, see “
.”