HP 3000dtn User Manual
Page 180
B-10
ENWW
ORDER SUPPLIES
Error
The Supplies Low setting in the LCD control
panel System Setup menu is set to Stop, and
more than one supply item is low, or one or
more ink cartridges is nearing expiration.
If the Auto Continue setting in the System
Setup menu is set to On, the printer continues
printing until the supplies are empty or the ink
cartridges expire. Otherwise, press
(select
button) to continue printing.
Warning
This message indicates one or both of
the following:
z
One or more of the ink cartridges are
running low on ink or are nearing
expiration.
z
The health of one or more of the
printheads is low.
Press
(select button) for more information
regarding specific ink cartridges and
printheads. Be prepared to replace the
specific ink cartridges and/or printheads with
new ink cartridges and/or printheads.
For more information regarding ink cartridges
and printheads used by this printer, see
“
or visit
PAUSED
Status
The printer has been paused and is currently
off line. It will not process and print jobs
currently in the queue. This feature is useful
when performing minor maintenance tasks on
the printer, like loading paper or replacing ink
cartridges. Press
(pause/resume button) to
switch the printer to the
READY
mode to
continue printing.
PEFORMING PAPER
PATH TEST
Status
A paper path test has been initiated.
The printer will continue feeding paper
through the paper path until
(cancel job
button) is pressed.
PERFORMING UPGRADE
Status
The printer firmware is currently being
upgraded. Please wait.
PLEASE WAIT
Status
Please wait. Printer has been placed offline
while job is being processed. Press
(pause/resume button)
to resume
processing job.
POWERING OFF
Status
(power button) has been pressed and
held, and the printer is preparing to turn off.
Message
Type
Description