HP 3000dtn User Manual
Page 184
B-14
ENWW
WAIT FOR PRINTER TO
REINITIALIZE
Status
The printer needs to reinitialize. It will
automatically turn itself off, and then turn itself
on again. Please wait.
WARMING UP
Status
The printer is warming up. Please wait.
13.JJ.NT JAM INSIDE
DUPLEXER
Error
A media jam has occurred in the auto-duplex
unit area. See “
“ for instructions on
clearing the jam.
13.JJ.NT JAM INSIDE
TOP COVER
Error
A jam has occurred inside the top cover area.
See “
“ for instructions on clearing
the jam.
13.JJ.NT JAM IN
TRAY 1
Error
A media jam has occurred in the Tray 1 area.
See “
“ for instructions on clearing
the jam.
13.JJ.NT JAM IN
TRAY X
Error
A media jam has occurred in the Tray X area
(where X=1, 2, or 3). See “
“ for
instructions on clearing the jam.
20 INSUFFICIENT
MEMORY
Error
More data has been received from the
computer than fits in the printer's internal
memory. To continue printing, press
(select
button).
Only the data that fits in the printer's internal
memory is printed. The remainder of the job
is canceled.
21 PAGE TOO COMPLEX
Error
The page decompression process was too
slow for the printer. Press
(select button) to
continue printing. There may be some data
loss on the page that was being formatted
when the error occurred.
22 EIO X BUFFER
OVERFLOW
Error
The printer's EIO card in slot X has overflowed
its I/O buffer during a busy state. Press
(select button) to resume printing. Some data
will be lost.
22 PARALLEL I/O
BUFFER OVER
Error
The printer's parallel buffer has overflowed
during a busy state. Press
(select button) to
resume printing. Some data will be lost.
22 USB I/O BUFFER
OVERFLOW
Error
The printer's USB buffer has overflowed
during a busy state. Press
(select button) to
resume printing. Some data will be lost.
40 EIO X BAD TRANS
Error
A connection with the card in EIO slot X has
been broken. Press
(select button) to
continue printing.
Message
Type
Description