HP 3000dtn - Manual (Page 71)

ENWW
6-5
Note Use only recommended HP media. For more information,
see "
Supported media types ."
*If you are using the optional multipurpose tray in the Tray 1 location,
this tray is designed to perform best using plain paper of weight 60 to
105 g/m
2
(16 to 28 lb plain bond), with a maximum stack height of 100
sheets (11-mm or 0.43-inch stack) of plain paper. It can use the same
size media as the single sheet manual feed unit that was originally
installed in the Tray 1 location.
This tray provides a straight-through paper path that can handle card
stock of weight 105 to 210 g/m2 (28 to 56 lb bond), with a maximum
stack height of 10 envelopes or cards. It can also hold up to 20 sheets
of photo paper or transparencies.
Tray 3 Paper 60 to 105 g/m
2
(16 to 28 lb plain
bond)
182 by 257 mm
(7.2 by
10.1 inches) to
216 by 356 mm
(8.5 by 14
inches) Up to 700 sheets (80-mm
or 3.2-inch stack)
Transparencies See note
below table Up to 50 sheets
Auto-
duplex
unit Paper
z U.S. Letter
z U.S. Legal
z U.S.
Executive
z JIS Executive
z A4
z JIS B5
z ISO B5
60 to 105 g/m
2
(16 to 28 lb bond)
176 by 250 mm
(6.9 by 9.8
inches) to 216
by 356 mm (8.5
by 14 inches) See note below table
Output bin All supported
media
See note
below table See note
below table Up to 300 sheets plain
paper (text printing)
Tray or
bin Size or type of
paper Weight Dimensions Capacity