HP 3000dtn - Manual (Page 28)

2-14
ENWW
Mac OS X
10 Open the Print Center (located in the Applications\Utilities folder),
and then click Add Printer.
11 On the pop-up menu, select USB.
12 If necessary, select the Zone.
13 Select HP Business Inkjet 3000 from the list, and then click Add.
A dot appears beside the printer name, indicating that this printer is
now the default printer.
Connecting the printer using a parallel cable in
Windows
Use a parallel cable to connect the printer to the computer if the
computer has a parallel port and is running Windows 98,
Windows Millennium Edition, Windows NT 4.0, Windows 2000, or
Windows XP.
1 Start Windows and make sure no other Windows applications
are running.
2 Insert the Starter CD into your CD-ROM drive. The CD menu runs
automatically.
If the CD menu does not run automatically, click Start, click Run,
and at the command line box, type the letter of your computer's
CD-ROM drive followed by :\SETUP (for example, type D:\SETUP).
3 On the CD menu, click Install Printer Driver.
4 Choose your language, and then click OK.
5 Follow the instructions on the screen.
6 Click Connected to this computer, and then click Next.
7 Be sure the Parallel check box is selected. Use the drop-down
menu to select the parallel port to which the printer is connected.
Note If the Express Install using HP recommended defaults check
box is selected, the installation program uses default options. If you
want to specify the installation options, clear this check box.
8 Follow the instructions on the screen to complete the installation.
9 Connect the parallel cable to the computer and the printer.