HP 3000dtn - Manual (Page 36)

3-4
ENWW
6 Insert Tray 2 into the Tray 2 case and push it firmly into the printer
until it locks into place.
Note If the tray will not close completely when it is reinserted, pull out the
tray half-way, and then push it in again until it closes completely.
7 Set the output bin on top of Tray 2. Push the output bin into the
printer. Be sure that both sides of the output bin snap into place.
Note You must configure the auto-duplex unit in the printer driver.
For more information, see “
Enable optional accessories in the
printer driver .”
HP Jetdirect print server
Your printer can be shared in a network environment by connecting it
directly to the network with an HP Jetdirect print server. An HP Jetdirect
print server provides better performance than printing directly from a
computer, and it provides flexibility in preparing a location for the
printer.
Installing an HP Jetdirect print server
The HP Jetdirect print server can be used in both client-server and
peer-to-peer printing configurations.
Note The HP Business Inkjet 3000n and 3000dtn come with an
HP Jetdirect print server installed. It is recommended that the
printer be shared on a network through the print server.
If you own the HP Business Inkjet 3000n or 3000dtn, skip step 1
and go on to step 2, “
Verify that the printer works .”
For a list of supported HP Jetdirect print servers, see “ Networking
accessories .”