HP 3000dtn - Manual (Page 40)

3-8
ENWW
Additional printer memory and font DIMMs
If you often print complex graphics or PostScript emulation documents,
or if you print with the optional auto-duplex unit, you might want to add
more memory to the printer. You can also install a font DIMM to print
languages such as Japanese or Korean.
Note Adding memory to the printer will allow it to process more complex
PostScript emulation and PCL 5c and PCL 6 jobs, but it might not
increase processing speed.
To find out how much memory is installed in the printer, print a
configuration page. See “
Printing a Configuration page .”
EIO hard disk drive
An EIO hard disk drive can be used for print job storage, and to
permanently store downloaded fonts and forms in the printer. Unlike
standard printer memory, items on the EIO hard disk drive remain in the
printer even when the printer is turned off.
For information about ordering an EIO hard disk drive, see “ Memory/
storage accessories .” For information about installing and using an
EIO hard disk drive, see the documentation provided with the EIO hard
disk drive.
Installing memory and font DIMMs
The printer is shipped with 64 MB of memory on the formatter and
24 MB of memory on the printer base. The printer has three dual inline
memory module (DIMM) slots that accept 64 or 128 MB RAM each or
4 MB flash DIMMs. The printer can support up to 344 MB of memory
(including the 24 MB on the printer base). This additional memory is
available for purchase as an accessory. For more information,
see “
Ordering supplies and accessories .”
You can also follow this procedure to install third-party
customized solutions.