HP 3000dtn - Manual (Page 54)

4-12
ENWW
Print Quality menu
This menu allows you to adjust aspects of print quality, including
calibration, printhead alignment, and quality level.
.
Message Value or
Submenu Description
ALIGN
PRINTHEADS N.A. This item begins the printhead
alignment process.
COLOR
CALIBRATION N.A. This item begins the color
calibration process.
LINEFEED
CALIBRATION N.A. This item begins the linefeed
calibration process.
CLEAN
PRINTHEADS N.A. This item begins the printhead
cleaning process.
REPLACE
PRINTHEADS N.A. This item moves the printhead carriage
to allow users to replace the printheads.
DEFAULT
QUALITY LEVEL DRAFT
NORMAL
BEST This item allows you to select the
default level for print quality. This setting
is used if the print job contains no
print-quality selection.
Default =
NORMAL
NORMAL MODE
PRINTING AUTO
SPEED
QUALITY This item allows you to select the type
or mode for normal mode printing to
produce optimal print output results.
SPEED prints at the best possible
speed, with less concern for
print quality.
QUALITY prints at a predetermined
quality level with less concern for print
speed.
AUTO combines speed and quality
settings depending on the health of
the printhead.
Default =
AUTO