HP 3000dtn - Manual (Page 55)

ENWW
4-13
System Setup menu
The System Setup menu allows you to make changes to general printer
default settings such as PowerSave Time, printer personality
(language), and jam recovery.
Message Value or
Submenu Description
JOB STORAGE
LIMIT 1-100 This item allows you to set the
maximum number of jobs that can
be stored on the printer. (This item
appears only if the printer has an
optional hard disk installed.)
Default =
32
JOB HELD
TIMEOUT OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK This item allows you to set how
long the printer stores a quick copy
job, which prints the requested
number of copies of the job and
stores a copy on the printer's
optional hard disk. Additional
copies can be printed later. (This
item appears only if the printer has
an optional hard disk installed.)
Default =
OFF
TRAY BEHAVIOR USE REQUESTED
TRAY
MANUALLY FEED
PROMPT
This item allows you to specify the
tray-selection behavior.
USE REQUESTED TRAY requires
the printer to print from only the tray
specified.
MANUALLY FEED PROMPT
requires you to press (select
button) on the LCD control panel
before printing begins.
POWERSAVE TIME 2 MINUTE
15 MINUTES
30MINUTES
60 MINUTES
90MINUTES
2 HOURS
4 HOURS
This item reduces power
consumption when the printer
has been inactive for an
extended period.
Default =
30 MINUTES
PERSONALITY AUTO
PCL
PS This item sets the default
personality to automatic switching,
PCL, or PostScript emulation.
Default =
AUTO