HP 3000dtn - Manual (Page 86)

6-20
ENWW
Printing on custom size media
z Use Tray 1 when printing on paper that is 89 by 140 mm (3.5 by 5.5
inches) to 216 by 356 mm (8.5 by 14 inches).
z Use the optional multipurpose tray (if installed) when printing on
paper that is 89 by 140 mm (3.5 by 5.5 inches) to 216 by 356 mm
(8.5 by 14 inches).
z Use Tray 2 when printing on paper that is 176 by 250 mm (6.9 by
9.8 inches) to 216 by 356 mm (8.5 by 14 inches).
z Use optional Tray 3 when printing on paper that is 182 by 250 mm
(7.2 by 9.9 inches) to 216 by 356 mm (8.5 by 14 inches).
z Use Tray 2, Tray 3, or the optional multipurpose tray (which is
installed in the Tray 1 location) when printing multiple sheets of
custom size media.
z If your application supports custom size media, set the media size
in the application before creating and printing the document. If your
application does not support custom size media, set the size in the
printer driver, create the document, and then print it. (You might
need to reformat existing documents to print them correctly on
custom paper sizes.)
To print custom size media using Tray 1
1 In the printer driver, select Manual Feed as the media source,
either select or create a custom size, and then print the document.
For more information about configuring settings in the printer driver,
see “
Using the printer driver .”
2 When the LCD control panel displays LOAD TRAY 1 [TYPE]
[SIZE] , insert one sheet of media into Tray 1. For more
information, see “ Loading Tray 1 .”
3 If you are printing more than one page, insert another sheet of
media when prompted by the printer.
To print custom size media from Tray 2, Tray 3, or the
optional multipurpose tray
Note The optional multipurpose tray is installed in the Tray 1 location.
1 Load the media in the tray.
For more information, see “ Selecting and loading print media .”
2 In the printer driver, select Tray 1, Tray 2, or Tray 3 as the media
source, and then either select or create a custom size.
3 Print the document.