Holder C 9.92 H - Manual (Page 103)

Operating Instructions
153 146 101
C 9.92
Operating the attachments
- Push the push-pull rod in.
The PTO speed will be 1000 RPM at an engine speed
of 2390 RPM.
ATTENTION
Never turn the PTO on with the engine off!
- Increase the engine speed to 1500-1800 RPM.
- Release the lock at the safety switch (1) and depress
the switch. The front PTO is now turned on.
- To turn the PTO off, press the safety switch (1) up.
- If the PTO is no longer required, put the push-pull rod
(3) back to the neutral position.
DANGER
After the PTO is turned off, the installed at-
tachment could continue to run. Wait until the
attachment is stationary before working on it
again.
Bild_C992H_093
1
Bild_S 990_007
2
3