Holder C 9.92 H - Manual (Page 26)

C 9.92 Operating Instructions
24 153 146
Technical data
Assembly Additional information Description
Rear lift
- Type HOLDER standard 3-point
- Attachment Category I and II
- Lifting power 15700 N (measured at attachment points)
- Cylinder 2 cylinders, double-acting
Dump body
- Dimensions L X W X H 1530 x 1140 x 215 mm
- Load capacity 1300 kg
Traction hydraulics
Variable pump Hydromatik
- Type A4 VG 40 EP
- Output 160 litres/min
- Operating pressure 380 bar (430 bar maximum)
Variable motor Hydromatik
- Type A6 VM 55 EP
- Displacement 26.1 - 55 cm 3 /rev
Hydraulic oil tank 45 L (common oil tank for traction and working hydraulics)