Holder C 9.92 H - Manual (Page 68)

C 9.92 Operating Instructions
66 153 146
Operation
Driving with SDS (Special Drive System)*
For the selection of the programs 1, 3 and 4 at the program
switch (2) refer to the section on driving on pages 63 and
64.
Driving program 2 (SDS)
-
Set the speed range knob (5) to range L.
ATTENTION
The tractor must be stationary for switching.
- Set the program switch (2) to range 2.
NOTE
In this range, the fine adjustment knob (1) is
not operational. The control is assumed by
the pedal (4).
- Set the engine RPM with the hand throttle (3).
- You can now control the ground speed steplessly with
the pedal (4) (accelerator).
* Option
3 2 1
Bild_C992H_024
4
Bild_S 990_002
5