Holder C 9.92 H - Manual (Page 190)

C 9.92 Operating Instructions
188 153 146
Maintenance as required
ATTENTION
Carry out the services and inspections only
with the engine turned off.
Checking the radiator, cleaning if necessary
- Inspect the cooling fins and oil cooler for the accumu-
lation of dirt.
Cleaning with compressed air
- Raise the platform* and secure it against accidental
lowering.
- Blow out any dirt from the engine compartment to the
outside.
Cleaning with cold cleaner or water jet
ATTENTION
Maximum spray pressure 60 bar, maximum
steam temperature 60 °C
- Raise the dumping subframe (dump body*) and
secure it against accidental lowering.
- Spray the oil cooler and engine with a cold cleaner
and allow it to soak in for 10 minutes.
- Clean the oil cooler and engine with a strong water jet.
ATTENTION
Do not aim the water jet directly at sensitive
parts such as the alternator, covering them if
necessary.
- Run the engine warm to prevent the formation of rust.
Bild_C992H_063