Holder C 9.92 H - Manual (Page 59)

Operating Instructions
153 146 57
C 9.92
Taking into service
Checking the brakes and steering for proper function
- Make a short trial run and check the steering and
brakes for proper operation.
DANGER
Do not drive a vehicle with a defective steer-
ing and/or braking system.
Starting the engine with automatic preheating
Starting procedure
- Turn the ignition key to position 1.
- The engine will be preheated. At temperatures below
+10°C the yellow lamp (2) and the preheating indicator
light (1) will come on.
- When the yellow lamp (2) goes out, turn the ignition
key to position 3 to start the engine.
- The automatic preheating will turn off some time after
starting and the preheating indicator light (1) will go
out.
NOTE
If the engine is not started, the preheating
procedure will cease approx. 10 s after the
yellow lamp (2) has gone out.
1
2
Bild_C288