Holder C 9.92 H - Manual (Page 213)

Operating Instructions
153 146 211
C 9.92
Annual maintenance
Bild_C992H_091
2
3
1 Before doing work on the electrical equipment, cut off the
power with the battery isolating switch (3).
- The switch must be in the vertical position and the
toggle removed.
- Disconnect the battery ground lead (2).
- Disconnect the battery positive lead (1).
CAUTION
Do not place any metal parts on the battery
poles. Risk of short circuit!
- Coat the battery poles and battery terminals lightly
with pole grease.
- Charge the battery and top up the electrolyte with
distilled water.
Lubricating the universal joints
- Refer to page 204 of maintenance every 1000 service
hours.