Holder C 9.92 H - Manual (Page 227)

Operating Instructions
153 146 225
C 9.92
Maintenance data
Technical data of the engine
S 990
Manufacturer Deutz AG
Model designation TD2011 L04w EU Tier IIIA
Design Vertical in-line
Type 4-stroke diesel
Cooling Water cooling
Method of injection Direct fuel injection
No. of cylinders 4
Cylinder bore Ø 96
Stroke 125
Cubic capacity 3619 cm³
Compression ratio 1:18
Max . charge pressure 1.4 bar
Valve clearances when cold Intake valve 0.3 mm
Exhaust valve 0.5 mm
Specific fuel consumption 216 g/kWh
Air filter Mann & Hummel dry filter with acoustic warning system
Lubricating system Forced-feed lubrication
Lubricating oil consumption 0.5% maximum of fuel consumption
Oil filter replacement cartridge in the main stream
Oil pressure at n=2600 RPM 1.5 bar
Rated speed 2600 RPM
Upper idle speed 2600 RPM +200 RPM
Lower idle speed 900-950 RPM
Max. torque to 97/68 EC 280 Nm at 1600 RPM
Power to 97/68 EC
at n=2600 RPM
68.0 kW (92 HP)