Holder C 9.92 H - Manual (Page 175)

Operating Instructions
C 9.92
Maintenance after the first 50 service hours
153 146 173
Changing the front and rear gearbox oil
Changing the front gearbox oil (including axle)
NOTE
Change the gear oil only when at operating
temperature.
- Park the tractor on a level surface.
- Remove the filler plug (1) at the front gearbox and
clean it with diesel oil.
- Place a suitable catch pan beneath the gearbox and
axles.
CAUTION
Danger of scalding when draining hot gear
oil.
- Remove the oil drain plug (2) at the front gearbox and
wash it with diesel oil.
- Remove the drain plugs (3) and clean them with diesel
oil.
- Allow the oil to drain completely.
- Refit the oil drain plugs with new sealing rings. Make
sure that the plugs are tight.
Bild_C992H_066
3 3
2
Bild_S 990_036
1