FUJITSU XG2600 - Manual (Page 18)

XG2600 Hardware Guide Chapter 1 Getting Started
Items in the Package, Descriptions and Functions 18
1.1 Items in the Package, Descriptions and
Functions
Before proceeding, check all the items described below.
1.1.1 Parts List
Please check that all of the following parts are included in the package.
• XG2600 The XG2600 switch.
• Power Cables (Qty 2) Cables to connect the XG2600 to an AC power source.
• SFP+ Dummy Caps (Qty 26)
Dummy caps to prevent dust when the SFP+ slots are open and unplugged.
The dummy caps come with the switch, installed on the slots at the time of purchase.
• Console cable adapter (RJ45 to Serial Adapter)
Straight cable with RJ-45 to D-SUB9 Converter Adapter.
• M6 Countersunk Screws (Qty 4)
Screws for fastening the rack rails to the front side of the rack.
• M6 Machine Screws (Qty 6) 4 screws for fastening the rack rails to the rear side of the rack, and 2 screws for
fastening the switch (rack mounting brackets attached to the side of the switch) to the
front side of the rack).
• Rack Mounting Rails (1 set)
Rails for mounting the switch in a rack.
‰ XG2600 Hardware Guide
(with Licence Agreement)
‰ M6 Countersunk Screws
(Qty 4)
‰ XG2600
‰ CD-ROM
‰ SFP+ Dummy Caps
(Qty 26)
‰ M6 Machine Screws
(Qty 6)
‰ Power Cables (Qty 2)
‰ Rack Mounting Rails (1 set)
XG2600
‰ Console cable adapter