FUJITSU XG2600 - Manual (Page 34)

XG2600 Hardware Guide Chapter 2 Installation
Installation of the switch 34
The diagram below shows in which slots PSUs need to be installed and airflow direction of the fans.
 : Installing – : not installing
The LED lights in a correct configuration as follows:
– : Unsupported because the unit is not installed
If the LED indicators are different from the above, it may be due to the incorrect configuration of PSUs and/or Fans, or
there may be failures with PSUs and/or Fans.
If the switch is installed in Front-Access configuration, it is necessary to remove PSUs and install them in different slots
than factory default ones, and change direction of fans.
Power Supply Unit Fan Unit
Switch Port Side Switch Fan Unit Side FAN1 Slot FAN2 Slot
PSU1 Slot PSU2 Slot PSU1 Slot PSU2 Slot Installation Airflow Installation Airflow
– –    Exhaust  Exhaust
Switch Port Side
Power Supply Unit Switch Fan Unit Side
Switch Port Side
Switch
Fan Unit Side
Slot 1/Slot 2
READY CHECK PSU1 PSU2 FAN
PSU1 PSU2 PSU1 PSU2
STATUS OUTFLOW
POWER
Green Off Green Green Green – – Green Green Green Green