FUJITSU XG2600 - Manual (Page 20)

XG2600 Hardware Guide Chapter 1 Getting Started
Items in the Package, Descriptions and Functions 20
1.1.3 Switch Fan Unit Side
• MAC Firmware Label This indicates the MAC addresses and firmware revision assigned to the switch.
• Fan Unit This switch is installed with two Fan Units.
• PSU Slots for Front-Access Configuration
Power Supply Units are plugged in the slots when the switch is used in a Front-Access
configuration.
• model name, serial number label
This indicates the model name, and serial number.
LED Details
• READY LED Indicates the operational state of the switch.
• CHECK LED Lights in orange when there is a problem. In that case, consult with responsible
engineers immediately.
• STATUS LED Lights to show the status of the Fan Unit.
• OUTFLOW LED Lights to show the direction of fan (airflow).
XG2600
Fan Unit
FAN2 FAN1
PSU Slots for
Front-Access Configuration
PSU2 PSU1
MAC Firmware Label
model name,
serial number label
XG2600
READY
CHECK
STATUS
OUTFLOW