FUJITSU XG2600 User Manual
Page 41
Advertising
XG2600 Hardware Guide
Chapter 2 Installation
Installation of the switch
41
Change PSU’s positions to meet different switch access configurations
There are two types of PSU Slot Bezel.
•
PSU Bezel (Vents with Logo)
Put it to empty PSU1 slot.
•
PSU Bezel (Vents without Logo)
Put it to empty PSU2 slot right next to PSU1 slot.
The procedure to change PSU configurations is shown below.
1.
Remove screws to take off two PSU slot bezels on the Fan Unit side (PSU1 and PSU2 slots).
2.
Remove screws and take off PSU units on the Port Side.
Vents with Logo
Vents without Logo
XG2600
SR-X526R1
Screw
XG2600
Advertising