FUJITSU XG2600 - Manual (Page 55)

XG2600 Hardware Guide Chapter 2 Installation
Time Setting 55
2.5 Time Setting
Make sure to set up the time before you do other settings of the switch. The time is not set at the initial timing of purchase.
Please refer below command for setting up time manually using console or telnet.
z Command
When setting time and date to be "Jan 1, 2011 12:30:00am" type in command
# date 2011/01/01.12:30:00
XG2600# configure
Switch to Configuration mode.
XG2600(config)# time zone -0500 When setting time zone to be “-0500”.
XG2600(config)# commit Apply the configuration.
XG2600(config)# save Save the configuration.
XG2600(config)# exit Switch to Operation mode.
XG2600# date 2011/01/01.12:30:00 Set time and date to be “Jan 1, 2011 12:30:00am”.