FUJITSU XG2600 - Manual (Page 52)

XG2600 Hardware Guide Chapter 2 Installation
Connecting a Setup PC 52
Turn on the Power
Caution
• Please use the power cable included in this product. Also, please do NOT use this power cable
on other products.
• If the power outlet does not match with the power cable plug, please use the change plug
adapter.
As a safety measure to prevent electrical shocks, please make sure to connect the ground wire
of the change plug.
Precautions
• Please set the switch (product) to a place near the electrical outlet which the power cable will be connected and
secure a space for the power cable to be pulled off easily.
• Please connect the power cable in the following order. PSU1 → PSU2
If you connect the cable in the wrong order, the CHECK LED will lit in orange. If the CHECK LED is lit, delete the
error log using the console command after turning on the power of the switch.
• When turning off the power. Please follow the above steps in an opposite order.
1. Connect the power cable to the electrical outlet.
2. Plug in the power cable to the power connecter of PSU1.
Power will turn on.
# clear logging error
#
Reference User’s Guide "5.18.1.5 clear logging error" (pg.365)