Led functions/behaviors – FUJITSU XG2600 User Manual
Page 21
XG2600 Hardware Guide
Chapter 1 Getting Started
Items in the Package, Descriptions and Functions
21
LED Functions/Behaviors
*) During the system diagnosis, READY LED is blinking in Green in every 0.5 second.
When the switch is operating under backup firmware, READY LED is blinking in Green in every 1 second.
LED Name
State
Status
READY
Green
Switch has started up correctly.
Green Blinking
Switch is being diagnosed or operating under backup firmware. (*)
Off
A problem has occurred.
CHECK
Orange
A problem occurs which may require switch replacement.
Orange Blinking
Firmware in the internal flash memory of the switch is destroyed.
Off
Switch is in normal operation.
STATUS
Green
Fan Unit is in normal operation.
Green Blinking
A problem has occurred with the Fan Unit.
Off
Fan Units are configured incorrectly or the power is not on.
OUTFLOW
Green
This indicates the FAN unit side is the exhaust side.
Off
This indicates the FAN unit side is the intake side.
Reference
See "2.2.1 Decide Switch Access Configuration" (pg.31) for detailed LED functions/behaviors under normal
operation.