FUJITSU XG2600 - Manual (Page 48)

XG2600 Hardware Guide Chapter 2 Installation
Connecting the Equipment 48
Precautions
Cable length will be as below based on the specification of the optical fiber cable.
Use the appropriate cable according to the installation place.
Replacing SFP+ Module
Precautions
It is possible to install/replace SFP+ module with the power on.
When replacing SFP+ module, follow the process below.
1. Make the replacing SFP+ slot to the "disable status".
• In case of using telnet or console
Enter replacing SFP+ slot number in <port>
• In case of using www browser
Make the SFP+ slot number to the selective status by "Setting of physical port" of settings menu.
Select "Disuse" of "Use of Physical Port", and click "Regist" icon.
2. Replace the SFP+ module after removing optical cable, and then install the SFP+ module.
Type Core/Cladding Diameter Minimum Transimission Band Cable Length (m)
MMF 62.5/125 µ m 160MHz/km 26
200MHz/km 33
50/125 µ m 400MHz/km 66
500MHz/km 82
2000MHz/km 300
# offline ether <port>