Fujitsu Siemens Computers S60 - Manual (Page 11)

U41221-J-Z156-1-74 3
Introduction Structure of the Manual
1.3 Structure of the Manual
The PRIMERGY S60 storage subsystem manual describes how to install and
configure the subsystem and perform expansions or upgrades.
You will find further information (see also entries in the chapter “Related publi-
cations” on page 81):
● in the “Safety, Warranty and Ergonomics” manual
● in the documentation on the PRIMERGY server
This manual consists of the following chapters:
● Important notes
This chapter contains instructions on the safe operation of your storage
subsystem as well as information about environmental protection.
● Operating and indicator elements
This chapter gives a detailed description of the operating panel and the
connecting elements on the rear panel of the storage subsystem.
● Floorstand model
This part of the manual describes how opening and closing the floorstand
model housing.
● Power supply
This part of the manual describes the power supply units and their power
supply. Fitting and removing power supply units is also described in detail.
● Fan module
This part of the manual describes the fitting and removal of the fan module.
● FC drives
This chapter describes in detail how the hot swappable drives must be dealt
with.
● Plug-in board modules
This chapter describes the FFx-RAID controller and its mounting and
removal.
● Connections
This chapter describes the FC and the mains connection.
The possibilities of supplying the storage subsystem with mains voltage are
also described.