Installing/removing the fan module, 1 cooling status led lights yellow, 1 installing/removing the fan module – Fujitsu Siemens Computers S60 User Manual

Page 42

Advertising
background image

34

U41221-J-Z156-1-74

Installing/Removing the Fan Module

Fan Module

6.1

Installing/Removing the Fan Module

I

Please note the status of the fan LED before removing and after installing
the fan module (3) (see section “Fan LED” on page 23).

Floorstand model

Ê

Remove the left side cover (see section “Removing/Mounting the left Side
Cover” on page 26).

Rack model

Ê

Loosen the two knurled screws on the front of the rack model and pull out
the storage subsystem from the rack.

Figure 13: Releasing and Removing the Fan Module

Ê

Release the fan module by putting two fingers into the recessed grips and
push the locking mechanisms found here inwards (1).

V

CAUTION!

Note the warning label “Rotating Parts“ (4) on the fan module. There
is an increased risk of injury from rotating parts.

Ê

Remove the fan module from the storage subsystem in the direction of the
arrow (2).

3

1

1

2

4

Advertising