Notes on the rack model, Notes on transportation – Fujitsu Siemens Computers S60 User Manual
Page 19
U41221-J-Z156-1-74
11
Important Notes
Notes on the Rack Model
2.6
Notes on the Rack Model
●
For safety reasons, at least two people are required to install the rack model
because of its weight and size.
●
When connecting and disconnecting cables, observe the notes in the
documentation for your PRIMERGY system and the comments in the
“Important notes” chapter in the technical manual supplied with the rack.
●
Ensure that the anti-tilt bracket is correctly mounted when you set up the
rack.
●
For safety reasons, no more than one unit may be withdrawn from the rack
at any one time during installation and maintenance work.
●
If more than one unit is withdrawn from the rack at any one time, there is a
danger that the rack will tilt forward.
●
The connection of the rack to the mains voltage must be installed by an
authorized specialist (electrician).
2.7
Notes on Transportation
I
Transport the storage subsystem in its original packaging or in other
suitable packaging which will protect it against shock or impact.
Do not unpack it until all transport maneuvers are completed.
If you need to lift or transport the storage subsystem, ask someone to
help you.