Fujitsu Siemens Computers S60 - Manual (Page 27)

U41221-J-Z156-1-74 19
Operating and Indicator Elements The Front
LED Indication Meaning
HDD
READY OFF The associated drive is not (correctly)
inserted or it is spun down and it is not
being accessed.
OFF
green intermittent
flashes The associated drive is spun down. The
drive is being accessed.
ON
green permanently on The associated drive is spun up and ready.
The drive is not being accessed or hot
spare drive.
ON
green intermittent
flashes The associated drive is spun up and ready.
The drive is being accessed.
green,
flashes steadily The associated drive is spinning up or
down (“prepare to remove” command: ca.
10 sec. flashes quickly 3 times per sec.,
followed from slowly flashes in 3 sec.
interval; see also section “Hot Swap for FC
HDD Modules” on page 42).
HDD
STATUS OFF There is no hard disk fault.
yellow,
permanently on HDD error occurred.
orange,
flashes quickly Drive identification.
orange,
flashes quickly – Drive rebuild: all drives belonging to the
pack blink synchronously.
– Error message from controller:
Critical LUN (Logical Unit Number)
– A drives was set on “Make Offline” and
the remaining HDD modules flash
quickly.
orange,
permanently on “Make Offline” state for the selected HDD
modules.
Table 2: Meaning of the HDD Control LEDs Indication