Fujitsu Siemens Computers S60 - Manual (Page 30)

22 U41221-J-Z156-1-74
The Rear Side Operating and Indicator Elements
3.2.3 Power Switch
The power switch is located also on the rear of the PRIMERGY S60 storage
subsystem. It is a slide switch with three possible settings.
Figure 6: Power Switch on the Rear of the PRIMERGY S60 Storage Subsystem
Position Function Description
(I) local ON The storage subsystem is switched ON permanently
and is connected directly to the mains (default
setting).
(R) The operating mode (on/off) is controlled via the Remote Service
Board. In this default setting, the storage subsystem is switched
on and off simultaneously with the server. If two servers are
connected, it remains active as long as one of the servers is
switched on.
(O) OFF The storage subsystem is switched OFF permanently.
Table 4: Possible Settings of the Power Switch
O
R
I