FireplaceXtrordinair 36 DV EFIII - Manual (Page 12)

1 2
Installation
(for qualified installers only)
Travis Industries 4040708 1 0 0 - 0 1 1 6 0
Facing Detail
3-3/4"
35-1/4"
26-3/4"
6-3/4"
21-1/2"
23"
1"
1"
Make sure these shaded areas are faced over
when using the arched face. Rectangular faces
do not require this area to be faced.
Access Door
1"
Face
1"
1-3/8” Rectangular Faces
1/4" Arch Faces
3/8” Architectural Faces
Glass
1/2"
Air Space
The overlap is 1-1/2" along
the top of the face. NOTE:
Do not tuck tile underneath the face on the bottom (there
will be a 1/2" air space below the access door). You may
do this on the sides and top, but not on the bottom.
• To achieve a facing that is flush with the drywall to the side of the fireplace, recess the framing directly
next to the fireplace. See the illustration below.
Fireplace
1"
1/2" Drywall
1/2" Concrete Board 3/8" Tile
This 2x4 is recessed 3/8"
to make a flush facing
Fireplace
1/2" Drywall
1/2" Concrete Board
3/8" Tile
The tile overlaps the drywall
for an overlap facing
Faceplate
1"
TOP
VIEW
Faceplate