FireplaceXtrordinair 36 DV EFIII - Manual (Page 28)

2 8
Finalizing the Installation
Travis Industries 4040708 1 0 0 - 0 1 1 6 0
Glass Frame Removal (continued) - Spring Pin Installation
The spring pin can come loose from the latch assembly. This occurs when it is turned 1/4 turn when it is
disengaged. Follow the directions below to re-install the spring pin if it becomes loose.
To re-install the spring pin, first
insert this end into a 1/4” key.
Insert the spring pin into
this bracket with the pins
aligned vertically.
Push in slightly and
twist 1/4 turn.
With this pin horizontal, the
spring pin will remain in place.
NOTE: The spring pins
can be installed with the
glass frame in place or
removed.