FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 10)

viii SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
4.2.1 Disconnecting a FRU from a Domain 4–3
4.2.1.1 Disconnecting a CMU/IOU 4–3
4.2.1.2 Disconnecting a PCI card 4–4
4.2.2 Disconnecting and Replacing a FRU 4–5
4.2.3 Configuring a FRU into a Domain 4–6
4.2.3.1 Configuring CMU/IOU 4–6
4.2.3.2 Configuring a PCI card 4–7
4.2.4 Confirming the Hardware 4–7
4.3 Hot Replacement 4–12
4.3.1 Disconnecting and Replacing a FRU 4–12
4.3.2 Confirming the Hardware 4–15
4.4 Cold Replacement 4–18
4.4.1 Powering the Server Off 4–18
4.4.2 Powering the Server On 4–19
4.4.2.1 From the Operator Panel 4–19
4.4.2.2 From the Maintenance Terminal 4–20
4.4.3 Confirming the Hardware 4–20
4.5 Power-On/Off of Main Line Switch 4–24
4.5.1 Types of Power Supply 4–24
4.5.1.1 AC Input Power 4–25
4.5.1.2 Power System 4–27
4.5.2 Power-On/Off Procedures of Main Line Switch 4–27
4.5.2.1 Power-On 4–28
4.5.2.2 Power-Off 4–28
4.5.3 Main Line Switch Locations 4–28
4.5.3.1 SPARC Enterprise M8000 Server Single-Phase Power
Feed
4–29
4.5.3.2 SPARC Enterprise M8000 Server Single-Phase and Dual
Power Feed
4–30