FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 304)

14-8 SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
FIGURE 14-5 Removing the CD-RW/DVD-RW Drive Unit (Front of the M9000)
13. Place the removed CD-RW/DVD-RW drive unit on an antistatic conductive mat.
14. Mount the replacement CD-RW/DVD-RW drive unit by following the removal
instructions in Step 12 in reverse order. Align the CD-RW/DVD-RW drive unit
with the slot guides, insert it carefully, and secure it firmly.
15. Attach the CD-RW/DVD-RW drive unit to the port.
Execute the cfgdevice -c attach -p port no. command of XSCF.
16. Confirm that the replaced CD-RW/DVD-RW drive unit is configured to the
domain.
From XSCF, execute the cfgdevice -l command to verify that the specified Port
number is displayed in the current connection.
17. From the OS, execute the cfgadm -c configure DVD_Ap_Id command to
configure the CD-RW/DVD-RW drive unit to the domain.
# cfgadm -c configure c0::dsk/c0t4d0
1
2